How to hack wireless networks

How to hack wireless networks

Wireless networks are accessible to anyone within the router’s transmission radius. This makes them vulnerable to attacks. Hotspots are available in public places such as airports, restaurants, parks etc.

In this tutorial, we will introduce you to common techniques used to exploit weaknesses in wireless network security implementations. We will also look at some of the counter measures you can put in place to protect against such attacks.

Topics covered in this tutorial

• What is a wireless network?
• How to access a wireless network?
• Wireless Network Authentication WEP & WPA
• How to Crack Wireless Networks
• How to Secure wireless networks
• Hacking Activity: Crack Wireless Password

What is a wireless network?

A wireless network is a network that uses radio waves to link computers and other devices together. The implementation is done at the layer 1 (physical layer) of the OSI model.

How to access a wireless network?

You will need a wireless network enabled device such as a laptop, tablet, smart phones etc. You will also need to be within the transmission radius of a wireless network access point. Most devices (if the wireless network option is turned on) will provide you with a list of available networks. If the network is not password protected, then you just have to click on connect. If it is password protected, then you will need the password to gain access.

Wireless Network Authentication

Since the network is easily accessible to everyone with a wireless network enabled device, most networks are password protected. Let’s look at some of the most commonly used authentication techniques.

WEP

WEP is the acronym for Wired Equivalent Privacy. It was developed for IEEE 802.11 WLAN standards. Its goal was to provide the privacy equivalent to that provided by wired networks. WEP works by encrypting the data been transmitted over the network to keep it safe from eavesdropping. 

WEP Authentication

Open System Authentication (OSA) – this methods grants access to station authentication requested based on the configured access policy.

Shared Key Authentication (SKA) – This method sends to an encrypted challenge to the station requesting access. The station encrypts the challenge with its key then responds. If the encrypted challenge matches the AP value, then access is granted.

WEP Weakness

WEP has significant design flaws and vulnerabilities.

• The integrity of the packets is checked using Cyclic Redundancy Check (CRC32).CRC32 integrity check can be compromised by capturing at least two packets. The bits in the encrypted stream and the checksum can be modified by the attacker so that the packet is accepted by the authentication system. This leads to unauthorized access to the network.
• WEP uses RC4 encryption algorithm to create stream ciphers.The stream cipher input is made up of an initial value (IV) and a secret key. The length of theinitial value (IV) is 24 bits long while the secret key can either be 40 bits or 104 bits long. The total length of both the initial value and secret can either be 64 bits or 128 bits long.The lower possible value of the secret key makes it easy to crack it.
• Weak Initial values combinations do not encrypt sufficiently. This makes them vulnerable to attacks.
• WEP is based on passwords; this makes it vulnerable to dictionary attacks.
• Keys management is poorly implemented. Changing keys especially on large networks is challenging. WEP does not provide a centralized key management system.
• The Initial values can be reused

Because of these security flaws, WEP has been deprecated in favor of WPA

WPA

WPA is the acronym for Wi-Fi Protected Access. It is a security protocol developed by the Wi-Fi Alliance in response to the weaknesses found in WEP. It is used to encrypt data on 802.11 WLANs. It uses higher Initial Values 48 bits instead of the 24 bits that WEP uses.  It uses temporal keys to encrypt packets.

WPA Weaknesses

• The collision avoidance implementation can be broken
• It is vulnerable to denial of service attacks
• Pre-shares keys use passphrases.  Weak passphrases are vulnerable to dictionary attacks.

How to Crack Wireless Networks

WEP cracking

Cracking is the process of exploiting security weaknesses in wireless networks and gaining unauthorized access. WEP cracking refers to exploits on networks that use WEP to implement security controls. There are basically two types of cracks namely;

• Passive cracking– this type of cracking has no effect on the network traffic until the WEP security has been cracked. It is difficult to detect.
• Active cracking– this type of attack has an increased load effect on the network traffic. It is easy to detect compared to passive cracking. It is more effective compared to passive cracking.

WEP Cracking Tools

• Aircrack– network sniffer and WEP cracker. Can be downloaded from http://www.aircrack-ng.org/
• WEPCrack– this is an open source program for breaking 802.11 WEP secret keys.  It is an implementation of the FMS attack. http://wepcrack.sourceforge.net/
• Kismet- this can detector wireless networks both visible and hidden, sniffer packets and detect intrusions. http://www.kismetwireless.net/
• WebDecrypt– this tool uses active dictionary attacks to crack the WEP keys. It has its own key generator and implements packet filters. http://wepdecrypt.sourceforge.net/

WPA Cracking

WPA uses a 256 pre-shared key or passphrase for authentications. Short passphrases are vulnerable to dictionary attacks and other attacks that can be used to crack passwords. The following tools can be used to crack WPA keys.

• CowPatty– this tool is used to crack pre-shared keys (PSK) using brute force attack. http://wirelessdefence.org/Contents/coWPAttyMain.htm
• Cain & Abel– this tool can be used to decode capture files from other sniffing programs such as wireshark. The capture files may contain WEP or WPA-PSK encoded frames. http://www.oxid.it/cain.html

General Attack types

• Sniffing– this involves intercepting packets as they are transmitted over a network. The captured data can then be decoded using tools such as Cain & Abel.
• Man in the Middle (MITM) Attack– this involves eavesdropping on a network and capturing sensitive information.
• Denial of Service Attack– the main intent of this attack is to deny legitimate users network resources. FataJack can be used to perform this type of attack. More on this in article

Cracking Wireless network WEP/WPA keys

It is possible to crack the WEP/WPA keys used to gain access to a wireless network. Doing so requires software and hardware resources, and patience. The success of such attacks can also depend on how active and inactive the users of the target network are.

We will provide you with basic information that can help you get started. Backtrack is a Linux based security operating system. It is developed on top of Ubuntu. Backtrack comes with a number of security tools. Backtrack can be used to gather information, assess vulnerabilities and perform exploits among other things.

Some of the popular tools that backtrack has includes;

• Metasploit
• Wireshark
• Aircrack-ng
• NMap
• Ophcrack

Cracking wireless network keys requires patience and resources mentioned above. At a minimum, you will need the following tools

A wireless network adapter with the capability to inject packets (Hardware)

• Backtrack Operating System. You can download it from here http://www.backtrack-linux.org/downloads/  (Software)
• Be within the target network’s radius. If the users of the target network are actively using and connecting to it, then your chances of cracking it will be significantly improved.
• Sufficient knowledge of Linux based operating systems and working knowledge of Aircrack and its various scripts.
• Patience, cracking the keys may take a bit of sometime depending on a number of factors some of which may be beyond your control. Factors beyond your control include users of the target network using it actively as you sniff data packets.

How to Secure wireless networks

In minimize wireless network attacks; an organization can adopt the following policies

• Changing default passwordsthat come with the hardware
• Enabling the authentication mechanism
• Access to the network can be restrictedby allowing only registered MAC addresses.
• Use of strong WEP and WPA-PSK keys, a combination of symbols, number and characters reduces the chance of the keys been cracking using dictionary and brute force attacks.
• Intrusion detection systems (IDS),systems such as WIDZ can help; network scanning, association floods and Rogue APs. http://ostatic.com/widz
• Firewallsoftware can also help reduce unauthorized access.

 

Hacking Activity: Crack Wireless Password

In this practical scenario, we are going touse Cain and Abel to decode the stored wireless network passwords in windows. We will also provide useful information that can be used to crack the WEP and WPA keys of wireless networks.

Decoding Wireless network passwords stored in Windows

• Download Cain & Abel from the link provided above.
• Open Cain and Abel

• Ensure that the Decoders tab is selected then click on Wireless Passwords from the navigation menu on the left hand side
• Click on the button with a plus sign

• Assuming you have connected to a secured wireless network before, you will get results similar to the ones shown below

• The decoder will show you the encryption type, SSID and the password that was used.

Summary

• Wireless network transmission waves can be seen by outsiders, this possess many security risks.
• WEP is the acronym for Wired Equivalent Privacy. It has security flaws which make it easier to break compared to other security implementations.
• WPA is the acronym for Wi-Fi Protected Access. It has  security compared to WEP
• Intrusion Detection Systems can help detect unauthorized access
• A good security policy can help protect a network.

Author : muhammed ramshin

Share this

Related Posts